NPS/AT - Stainless steel weighing belt

The NPS-AT series weighing belt is recommended for dosing materials in powder or granules, with working flow rate of 300 to 30,000 kg/h.
This special AT version built totally in stainless steel and with electronic components IP67/66allows the belt to be spray washed with water and is therefore suitable food industry use.
The base model is complemented by different customisable versions according to the production requirements.
The belt can work as an extractor from silos or hoppers, allowing use as a fixed-capacity dosing system in the production of mixes at continuous cycle.
The COBRA 365 control unit also permits its use as a weight total counter, set weight dosing system, or master/slave percentage dosing system.


stainless steel weighing conveyor belt
TECHNICAL CHARACTERISTICS VALUE
STAD reserves the right to modify product characteristics without prior notice.
Load bearing frame Stainless steel
Heads Stainless steel
Filling and discharge hoppers Optionals in stainless steel
Belt With calibrated jointing in various materials according to application
Sides Optionals in stainless steel and soft strips according to application
Casing Optional in polycarbonate
Weighing system Off center double load cell C3 in stainless steel
Speed control Incremental encoder 1000 pulse/rev IP66
Junction boxes Available for load cell and encoder junction
Optional three-phase multi-voltage or semi-vector asynchronous motor
Servo-ventilation Optional according to application
Hardware and supports Stainless steel
ATEX conformity Available as an option for ATEX 22 zones