- NPS/A - Stainless steel weighing belt
The NPS-A series weighing belt is recommended for dosing materials in powder or granule form with a working flow rate of approx. 300 - 30,000 kg/h.
This particular A version , totally built in stainless steel and containing IP67/66 electronic components, can be washed with water jets and is therefore suitable for the food industry or other sectors where the transiting material is particularly aggressive.
The base model is complemented by different customisable versions according to the production requirements.
The belt can work as an extractor from silos or hoppers, allowing use as a fixed-capacity dosing system in the production of mixes at continuous cycle.
The COBRA 365 control unit also permits its use as a weight total counter, set weight dosing system, or master/slave percentage dosing system.
|STAD reserves the right to modify product characteristics without prior notice.|
|Load bearing frame||Stainless steel|
|Filling and discharge hoppers||Optionals in stainless steel|
|Belt||With calibrated jointing in various materials according to application|
|Sides||Optionals in stainless steel and soft strips according to application|
|Casing||Optional in polycarbonate|
|Weighing system||Off center double load cell C3 in stainless steel|
|Speed control||Incremental encoder 1000 pulse/rev IP66|
|Junction boxes||Available for load cell and encoder junction|
|Optional||three-phase multi-voltage or semi-vector asynchronous motor|
|Servo-ventilation||Optional according to application|
|Hardware and supports||Stainless steel|
|ATEX conformity||Available as an option for ATEX 22 zones|