NPS - Weighing Belt
The NPS series weighing belt is recommended for dosing materials in powder or granule form with a working flow rate of approx. 300 - 50,000 kg/h.
The base model is complemented by different customisable versions according to the production requirements.
The belt can work as an extractor from silos or hoppers, allowing use as a fixed-capacity dosing system in the production of mixes at continuous cycle.
The COBRA 365 control unit also permits its use as a weight total counter, set weight dosing system, or master/slave percentage dosing system.
| TECHNICAL CHARACTERISTICS | VALUE |
|---|---|
| STAD reserves the right to modify product characteristics without prior notice. | |
| Load bearing frame | Extruded aluminium profiles |
| Heads | Stainless steel |
| Filling and discharge hoppers | Optionals in stainless steel |
| Belt | With calibrated jointing in various materials according to application |
| Sides | Optionals in steel and soft strips according to application |
| Casing | Optional in polycarbonate |
| Weighing system | Off center double load cell C3 |
| Speed control | Incremental encoder 1000 pulse/rev |
| Junction boxes | Available for load cell and encoder junction |
| Optional | three-phase multi-voltage or semi-vector asynchronous motor |
| Servo-ventilation | Optional according to application |
| Vibration damping supports | In rubber and 60ShA steel |
| ATEX conformity | Available as an option for ATEX 22 zones |
